| 品牌 : | 伯朗特 |
产品穿过开孔10落到收集箱12中，接着负压吸附装置9松开间隔件，将间隔件放置在下模3的内腔中，间隔件与下模3内壁有摩擦力，不会自动掉落，从而使装置在收取成品时就能将间隔件放置在下模3内腔中，降低生产产品的繁琐程度，降低工作人员的工作量，装置中所用到的用电设备均通过导线和外部电源开关电性连接。其中，绍兴伯朗特机械手诚信为本，底板4左侧外壁与连接杆14固定连接，绍兴伯朗特机械手诚信为本，连接杆14竖截面呈L型，绍兴伯朗特机械手诚信为本，左侧电动伸缩杆7左侧顶部外壁与导向杆13固定连接，导向杆13左端与连接杆14远离底板4的一端固定连接，伺服滑台6移动时，使导向杆13带着连接杆14将底板4从下模3底部拉走，方便打开下模3的底部；注塑机本体1底部外壁对称设置有两组连接块11，连接块11与注塑机本体1固定连接，连接块11竖截面呈L形，收集箱12左右两侧顶部外壁均开设有连接槽，两组连接块11相互靠近的一端分别插接在两组连接槽的内腔中，向前移动收集箱12，使连接块11从连接槽中移出，使收集箱12与注塑机本体1连接断开，方便取下收集箱12，注塑机本体1底部外壁与挡块固定连接，挡块前侧外壁与收集箱12后侧外壁相贴合，对收集箱12的位置进行阻挡，使收集箱12安放稳定；两组电动伸缩杆7之间的间距大于下模3内腔竖截面的长度。
伺服横走式机械手BRTA07/09系列适用于80T-320T的各型卧式射出成型机的成品及水口取出。上下手臂结构是双截式，分单臂和双臂，适合二/三板模具产品取出。横行AC伺服马达驱动，定位精细，速度快，寿命长，故障低。安装机械手可增加产能(10-30％)、降低产品的不良率、保障操作人员的安全性、減少人工、精细控制生产量、减少浪费、保证交期BRTA07/09 Series traversing robot arm is applicable to alltypes of horizontal injection machine ranges of 807-320Tfor take-out products and sprues. Vertical arm is telescopictype, with product arm and runner arm, for two plate orthree plate mold products take out. Traverse axis driven byAC servo motor. After installed this robot, the productivitywill be increased 10-30%, reduce defective rate, ensuresafety of operators, reduce manpower and accuratelycontrol the output to reduce waste
BRTN Series is applicable to all types of horizontal injectionmachine ranges of 650T-3200T for take-out products and sprues
Three-axis driven by AC servo motor, take-out at suoernlgh-speedat most 2. 5sec. Easy for E-O-A-T adjustment, long using life andlow failure rate, applicable to take-out products with short formingcycle or complex automatic, such as auto products, washingmachine and household appliance products take-outHC three-axis/five axis CANOPEN connecting way.
Less connecting line, long distance communication, goodexpansibility, strong anti-interference abiliity, high repeatprecision, can simultaneously control multi axis, simple equipmentmaintenance. low failure rate
