| 品牌 : | 伯朗特 |
伺服横走式机械手BRTA07/09系列适用于80T-320T的各型卧式射出成型机的成品及水口取出。上下手臂结构是双截式，分单臂和双臂，适合二/三板模具产品取出。横行AC伺服马达驱动，定位精细，速度快，青浦区性能优良伯朗特机械手，寿命长，故障低，青浦区性能优良伯朗特机械手。安装机械手可增加产能(10-30％)、降低产品的不良率、保障操作人员的安全性、減少人工、精细控制生产量、减少浪费、保证交期BRTA07/09 Series traversing robot arm is applicable to alltypes of horizontal injection machine ranges of 807-320Tfor take-out products and sprues. Vertical arm is telescopictype, with product arm and runner arm，青浦区性能优良伯朗特机械手, for two plate orthree plate mold products take out. Traverse axis driven byAC servo motor. After installed this robot, the productivitywill be increased 10-30%, reduce defective rate, ensuresafety of operators, reduce manpower and accuratelycontrol the output to reduce waste
一、两板模：(1)手动脱模A：夹取料头(成品与料头连在一起，机械手取出后再人工分离成品与料头)。B：吸取或抱取成品(成品与料头连在一起，用机械手吸取或抱取成品)。C：夹取料头，吸取或抱取成品(成品与料头在射出机顶出时，成品与料头已分开，用机械手取出后，可分别置放料头和成品于不同处。(2)自动脱模A：夹取料头，分离料头(夹取料头，让成品自动脱落分离成品与料头)。B：分离不同状况的成品(夹取料头，吸取或抱取成品分离成品与料头)。C：吸或抱取成品分离成品(吸或抱取成品，让料头自动脱落分离成品与料头)。二、三板模：(1)成品、料头均不能自动脱落A：成品臂吸取或抱取成品，料头臂夹取料头。用机械手使成品与料头分离(双臂机械手)。B：料头臂夹取料头，成品臂扫落成品让其达成自动脱模方式，分离成品与料头。(2)成品可自动脱落，料头不可自动脱落A：夹取料头，成品自动脱落，分离成品与料头(单臂机械手)。B：成品臂吸取或抱取成品，料头臂夹取料头，用机械手分离成品与料头(双臂机械手)。
五轴横走式机械手BRTR系列机械手臂适用30T-100T的各型卧式射出成型机，手臂形式是单截式，分3轴及5轴AC伺服驱动。取出时间1sec，全循环6sec应用于快速取出或是模内贴、模內镶件等特殊产品应用。华成三/五轴专用 CANOPEN总线通讯方式：信号线少，远距离通讯，扩展性能好，抗干扰能力强，重复定位精度高，可以同时控制多轴，设备维护简单，故障率少。 BRTR Series is applicable to all types of horizontal injection machineranges of 30T-100T for take-out products and sprues Vertical armis single stage. With types of three-axis and five-axis driven by ACservo motor Products take-out at super high-speed(1sec. )and drycycle time within seconds, applicable to take-out products withshort forming cycle or complex automatic. Also with the function ofmold labeling and mold inserting
HC three-axis/five axis CANOPEN connecting way
Less connecting line, long distance communication, goodexpansibility, strong anti-interference ability, high repeatprecision, can simultaneously control multi axis, simple equipmentmaintenance, low fallure rate
