规格 | 120/240/340 |
---|---|
材质 | ABS/PC |
工艺 | 注塑/注射 |
适用范围 | 通信机房 |
品牌 | 天诚 |
型号 | WXC |
苏州天诚电讯科技有限公司是集电子、通信产品的研发、加工制造、销售和服务于一体的小型高科技企业,致力于开发高科技产品,拥有一批长期从事通讯行业的专业人才;雄厚的技术力量,精湛的专业技术知识,为通信行业客户奉献**的产品和优良的服务。
本公司生产的光纤槽道广泛应用于中国电信**、中国联通及中国广电的机房,及某些公司的内部机房。产品质量、美观、实用性收到国内外客户的一致好评。
用户遍及江苏、安徽、福建、湖南、重庆、北京、河南、河北、辽宁、吉林、黑龙江、陕西、青海、新疆及中东、东南亚等地。
Suzhou Tiancheng Telecom Technology Co., Ltd. is a smart high-tech enterprise with a team of professionals engaging in communications industry.
The optical fiber raceway we produced is widely used in China Telecom, China Mobile, China Unicom and Middle East, Southeast Asia, etc.
特点characteristic
采用工程塑料阻燃ABS,表面光滑,使光纤自然平铺,走线规则有序;
采用封闭式槽道,重量轻,具有较高的冲击韧性和良好的机械性能,保护光纤不受损伤;
出口位置灵活,能满足各种地方出纤的需要,出纤口波纹管保护光纤;
三通、四通接头,及各种弯头,满足各种走线需求,灵活配置;
标准化模块设计,安装方便,结构紧凑,槽道连接可靠,可以上固定,也可下固定;
走线架和走线槽道整体设计,布局合理,外形统一,美观整齐;
采用特别严格加工工艺,色差控制在&E<2、&L<1、&A<1、&B<1,一眼看见的是几乎没有色差的黄色光纤槽道。
Closed raceway protects optical fiber,made in anti-flaming engineering plastic with light weight, high impact toughness and good mechanical properties. It can be mounted easily with T joint, cross joint, various elbows, flexible exit and corrugated pipe, etc.
主要技术指标main parameters
1工作温度thermal rating:—5℃~+45℃;
2 相对湿度relative humidity:不大于85%(+40℃);
3 大气压力atmospheric pressure:70kPa-106kPa;
4 光纤槽道色泽均匀,表面平整、光滑、洁净、无飞边、暗泡、收缩、凹陷或机械损伤等缺陷;
Even color, smooth and clean. without flash, dark bubble, shrinkage, depression or mechanical damage, and other defects.
5 光纤槽道在恒定温热试验前、后,其内外表面之间能承受交流4200V(方根值)工频正弦波电压持续1min的介电性能试验。试验后绝缘电阻不小于20MΩ;
Dielectric performance test is done before and after constant temperature test, the communication 4200V (rad value) industrial frequency sine wave voltage is applied between internal and external surfaces for 1minute. After test insulation resistance is no less than 20MΩ.,
6 光纤槽道能承受低温试验。试验后,试样不产生裂痕或脆断;
After low temperature test, the sample does not appear breaks or brittle fracture
7 光纤槽道能承受规定条件下的老化、冲击试验。试验后,试样不产生裂纹或脆断;
After the stated conditions of aging, impact test, the sample doesn’t crack or brittle fracture,
8 塑料件燃烧性能:Plastic combustion performance
⑴ 注塑件、挤出件制品燃烧性能符合等级:GB/T2048-1996中FV-0级;
Plastic injector, extruder products combustion performance accords with level FV-0 of GB/T2048-1996.
⑵ 波纹软管制品燃烧性能符合等级:GB/T2048-1996中FV-2级。
Corrugated pipe combustion performance accords to level of FV-2 of GB/T2048-1996.
9 色差Color shading:&E<2、&L<1、&A<1、&B<1.
订货指南Order guide
测绘surveying and mapping
测量待装机房光纤传输设备的位置
Measuring the position of optical equipment,
根据光纤设备的位置和数量以及走线架的高度和间距,确定出口的形式和数量
The form and quantity of exits is determined by the position and number of optical equipments and the height and spacing of wiring rack.
根据光纤槽道的路径,确定零部件的数量
The number of all sorts of parts is determined by the path of optical fiber raceway.
根据走线架,确定支撑件
Supports is determined by wiring rack
与客户沟通
Communication with customer
确定光纤槽道的路径
Determine the path of optical fiber raceway.
确定将来是否扩容
Determine if expansion in the future
现场勘测,确定方案,给出配置并报价
Field investigation, determine the scheme, configuration and quotation