起订:1
供应:50
发货:3天内
牌号:
巴陵岳化
厂商/产地:
湖南岳阳
用途级别:
注塑
尼龙—6切片
特征:尼龙—6切片生产采用两端聚合,连续萃取,联系干燥和DCS集散系统控制,产品为无色透明,无机械杂志,粒度均匀的圆柱形颗粒。切片规格(直径×长)为2.0—2.5×2.0—2.5。
用途:尼龙—6切片粘度在2.4—3.6之间,可满足高速纺和拉膜生产要求,广泛用于民用丝,工业丝,尼龙6薄膜以及高度度工程塑料的生产。
Nylon 6 Chip
The nylon 6 chip plant of Baling Petrochemical is one of the largest plants in China The output or Eagle King nylon 6 chip is 42 kt annually. The primary technology and equipments of polymerization unit was imported from Germany. The main production technologies include two-state polymerization, continuous extraction, continuous drying and DCS distributed control system, which reaches the advanced international level.
Characteristics:
Nylon 6 chip is colorless transparent column-shaped particles with unitform particle size and no mechanical impurities. The specification of the chip is 2.0-2.5×2.0-2.5(diameter×length)
Application:
Nylon 6 chip has the viscosity of 2.4-3.6, satiosfying the requirement of high-speed spinning and drawing film. It can be widely used in the filed of civit yarn, industrial yarn, nylon 6 film and high-strength engineering plastics.
包装:
用内衬铝箔的聚丙烯编织袋或内衬铝箔的牛皮纸包装袋冲氮气包装,每袋净重25kg。
尼龙—6切片技术规格(企业标准 Q/SH3185 021-2005)
Technical specification of nyion 6 chip(enterprise standard Q/SH3185 021-2005)
执行标准:Q/SH3185 021—2005
项目Item指标实验方法Qualified优等品Superior一等品First grade合格品Qualified相对粘度Relative visicosityM±0.05M±0.10M±0.15PV07099.4可萃取物含量,%(质量分数) ≤Extractabie matter % ≤0.60.81.0PV07093.2干燥后的残余水分,%(质量分数) ≤Water remains after dry ≤0.060.080.10PV09012.2深色杂质(黄黑粒子),粒/100gDark impurity(yellow and black particte).Number/100g无(No)1>1称重法
注:相对粘度在2.4~3.6范围内可调,M为相对粘度中值,具体数值可由供需双方商定。
Note:The relative viscosity can be adjusted from 2.4 3.6 M the medium of relative viscosity can be determined by both sides of suppliers and buyers.
①M为相对粘度中值,具体数据可由供需双方商定。需方没有要求是,按照M=3.45或M=3.35控制。
②可实现相对粘度在2.4—3.6范围内可调。
③外观质量指标—深色杂质(黄黑粒子)为判断指标。
④外观质量指标—连刀并条率要求应低于10%,该项作为生产过程控制指标,不作为判等指标。
⑤上述质量指标为常规检验指标,特殊质量指标由供需需双方商定。
储运:
储于干燥库房,远离火源,储存和运输过程中严禁混放易燃,易挥发的农业生产体系溶剂。