PVC管材咨询-PVC管材-Gafloon卡弗龙(查看)

• 供货总量 : 不限
• 价格说明 : 议定
• 包装说明 : 不限
• 物流说明 : 货运及物流
• 交货说明 : 按订单

ppr管熔管的时候，发现成功率不高，主要为接管后发现会有点歪，个人比较主义，所以不满意的全部剪掉重来，这样导致会浪费很多接头。在熔管的时候，先用PPR管剪刀切好ppr管。

When the PPR pipe was melted， it was found that the success rate was not high. The main reason was that it would be a little crooked after taking over. It was individualistic， so it was not satisfied to cut all the parts and start over again， which would lead to a lot of joint waste. When melting the pipe，PVC管材品牌， first cut the PPR pipe with PPR pipe scissors.

冷热水管不要同槽

水路改造时，冷热水管要不要同槽，而且两者之间距离保持10cm以上。如果热水管紧挨冷水管，会降低热水管的保温性，热水很快就会变冷。这里还要提醒大家，水管开槽较深，要避免开开横槽，横槽会破坏墙体结构。

Hot and cold water pipes should not be in the same tank

In waterway rectruction， whether the cold and hot water pipes should be in the same groove， and the distance between them should be kept at least 10 cm. If the hot water pipe is close to the cold water pipe， the heat preservation of the hot water pipe will be reduced， and the hot water will soon become cold. Here also reminds everybody， the water pipe groove is deep， must avoid to open the transverse groove， the transverse groove will destroy the wall structure.

管道壁厚的增加直接带来的性能的提升，比如：工作压力增大，PVC管材生产，刚性增强，线性膨胀系数降低，PVC管材咨询，耐温性能提高等等。

The increase of pipe wall thickness directly improves the performance， such as the increase of working pressure，PVC管材， the increase of rigidity， the decrease of linear expansion coefficient， the improvement of temperature resistance and so on.

PVC管材咨询-PVC管材-Gafloon卡弗龙(查看)由台州艾菲力塑胶有限公司提供。台州艾菲力塑胶有限公司实力不俗，信誉可靠，在浙江 台州 的塑料管等行业积累了大批忠诚的客户。艾菲力塑胶带着精益求精的工作态度和不断的完善创新理念和您携手步入辉煌，共创美好未来！同时本公司还是从事PPR管，地暖管，PVC管的厂家，欢迎来电咨询。