奥博环保 框架式除尘滤袋 PTFE+PPS除尘滤袋 除尘滤袋

材质	PTFE+PPS
适用范围	风机,过滤壶,烤漆房,吸尘器,制糖,医用,空气净化器,过滤器,汽车发动系统,油烟机,净水器
用途	防尘、除尘
类型	高效
适用对象	粉尘
性能	防静电,防火,防水,防油,耐酸,耐低温,耐高温,耐碱
品牌	AOBO
型号	AOBO-8

产品信息名称： 框架式除尘滤袋 品牌： AOBO 货号： AOBO-6 产品特点产品特性：
优点：AOBO-2型纤维滤料，是结合了PPS、PTFE两种纤维的优势，有效提高了PPS滤料的耐腐蚀性、抗氧化性等。

Product information

Name: frame type dust filter bag

Brand: AOBO

Item no: AOBO - 6

Product features

Product features:

Advantages: AOBO - 2 type fiber filter material, is a combination of PPS, PTFE, two kinds of the advantages of fiber, effectively improves the corrosion resistance of PPS filter material, oxidation resistance, etc.

框架式结构除尘滤袋：
奥博HAT-2系列滤料是山东奥博环保科技有限公司在承担国家863课题干法脱除多污染物协同控制技术的基础上，针对工况环境相对恶劣的高温、高湿、腐蚀性强的烟气除尘开发的纤维针刺毡滤料。适用于普通PPS滤料无法满足的工况环境使用的高效滤料，具有除尘效率高，烟气阻力低的过滤特点。该滤料具有耐腐蚀、耐氧化、过滤精度高、排放低、性能稳定和寿命长的特点。
奥博AOBO-2型滤料由优质超细PPS和不同配比PTFE纤维面层、PPS纤维层、加强型PTFE基布、PPS粗纤维层4层构成。 
采用超细面层，使针刺毡表面更致密，阻挡微细粉尘能力提高；通道前窄后宽，滤料内层不易集尘，保持滤料长期稳定运行而阻力上升变化速度减缓，同时表面易清灰。超细面层的使用实现了滤料的过滤性能由“深层过滤”进化到“表层过滤”。
后处理方式采用PTFE重磅浸渍防腐，使PTFE包覆在纤维的表面形成一层完整的膜，以降低气体的通透阻力、加强滤料表面的防水防油能力及易清灰性能。滤料采用高温定型处理，保证滤料在高温使用环境中有良好的尺寸稳定性。滤料表面做了防水防油处理，保证其不吸水，表面具有憎水性能，在应用中有效降低糊袋概率，不致孔隙堵塞，容易清灰，且有耐酸、碱等化学性能。
滤料用日本进口重机采用PTFE线进行缝制，加工成布袋。底部10cm加强。为保证达到更高的排放标准，针孔全部经过耐高温硅胶进行封闭涂层处理。避免微细粉尘在针孔中渗漏，保证总的排放浓度更低。先进的设备和良好的线材保证滤袋在使用过程中不会出现因掉针、断线等所造成的隐性故障，使滤袋性能更加优良。

frame type structure of dust filter bag:

Ordered HAT - 2 series filter material is ordered in shandong environmental protection technology co., LTD in bear country 863 project dry removal of pollutants coordinated control technology on the basis of in view of the working environment is relatively poor high temperature, high humidity, strong corrosive flue gas dust removal and development of fiber needled felt filter material. Suitable for ordinary PPS filter material cannot meet the working environment of using high efficient filter material, with high efficiency of dust collection, the filtration characteristics of flue gas resistance is low. The filter material has corrosion resistance, oxidation resistance, high filtration precision, low emissions, stable performance and long life characteristics.

Arbor AOBO - 2 type filter material by high quality superfine PPS and different ratio of PTFE fiber surface, PPS fiber layer, reinforced PTFE base cloth, PPS crude fiber layer 4.

Is made of super fine surface, surface of needled felt more dense, stop the fine dust capacity increase; Channel after former narrow width, layer of filter material is not easy to dust, keep the filter material long-term stable operation and slow speed of change in resistance to rise, at the same time surface Yi Qing ash. Super fine surface used to implement the filtering performance of the filter by filter "deep" evolved to "surface filtration".

PTFE blockbuster immersion corrosion post-processing way, make the PTFE coated on the surface of fiber form a complete layer of film, in order to reduce gas permeability resistance, strengthen waterproof and oil on the surface of the filter material performance ability and Yi Qing ashes. Filter material with high temperature to finalize the design process to ensure that the filter material used in high temperature environment with good dimensional stability. Filter material surface did waterproof and oil processing, ensure its not bibulous, surface with hydrophobic properties, effectively reduce the probability of paste bag, in the application from pore jams, easy to dust, and acid, alkali and other chemical properties.

Filter material with imported from Japan juki with PTFE line sewing, processed into a bag. At the bottom of the 10 cm to strengthen. In order to ensure the higher emission standards, pinhole all after high temperature resistant silicone seal coating processing. To avoid the leakage in a micro dust in the pinhole, guarantee the total emission concentration is lower. Advanced equipment and good wire to ensure filter bag in use process will not be because of the drop needle, break the caused by recessive fault, such as the filter bag more excellent performance.

  

执行标准：
1、环境保护产品技术要求—袋式除尘器滤袋  HJ/T327-2006
2、袋式除尘器技术要求  GB/T6719-2009
3、火电厂大气污染物排放标准 GB13223-2011
4、生活垃圾焚烧大气污染物排放标准DB11502-2008

 

Execution standard:

 

1, environmental protection product technical requirements - bag filter filter bag (HJ/T327-2006

 

2, bag filter technology request of GB/T6719-2009

 

3, power plant air pollutants emission standards GB13223-2011

 

4, living garbage incineration air pollutants emission standards DB11502-2008

 

 

 应用场合：
1、燃煤锅炉布袋除尘器
2、半干法、干法脱硫布袋除尘器
3、生物质发电布袋除尘器
4、垃圾焚烧发电（流化床锅炉）
5、黄金冶炼收砷系统
6、冶炼厂冰铜干燥系统
7、高岭土除尘系统
适用于含氧量高、氧化性酸性气体过高的工况中。

 

Applications:

 

1, coal-fired boiler, bag dust collector

 

2, half dry, dry desulfurization bag dust collector

 

3, biomass power generation bag dust collector

 

4, garbage incineration power generation (fluidized bed boiler)

 

5, collect arsenic gold smelting system

 

6, smelter matte drying system

 

7, kaolin dust removal system

 

实验室

 奥博是高端复合型人才孵化基地。现有工程技术人员40人，其中高级技术人员16人，中级技术人员8人， 每年委派不少于10人到高校进行培训，并聘请相关专家、教授进行指导，大力提升技术人员的研发能力。通过人才定向培养与交流，打造出一支精干、专业的科研队伍，为公司长期发注入了新的活力。

 

奥博立足科技创新，致力工业除尘，先后投资3000多万元，建成了2000多平方米的科研中心，成立了山东省袋式除尘唯一工程技术研究中心。公司先后引进数字式透气仪、电子织物强力机、全能型可见光谱分析仪、风动洞过滤效率测试线等研发试验设备30余台（套），总价值1000余万元，在国内同行业处于领先水平。

 

's high-end talents for incubators. Existing engineering and technical personnel 40 people, including senior technical personnel 16 people, intermediate technical personnel 8 people, appointed each year not less than 10 people to the training of colleges and universities, and invite relevant experts, professors, guide, vigorously promote technical personnel's research and development ability. Through the orientation training and communication, to create a compact, professional r&d team, long hair has injected new vitality to the company.

 

 

 

Ordered based on scientific and technological innovation, is committed to industrial dust removal, has invested more than 3000 ten thousand yuan, has built more than 2000 square meters of scientific research center, set up in shandong province, the only engineering technology research center of bag-type dust collector. Company has introduced digital air meter, electronic fabrics strength machine, universal visible spectrum analyzer, pneumatic hole filter efficiency testing line, such as research and development testing equipment more than 30 Taiwan (sets), the total value of more than 1000 ten thousand yuan, in the same industry in a leading level in China.

 

 

  框架式除尘滤袋

华能临沂发电有限公司 2*140MW机组烟气脱硫袋式除尘配套工程  AOBO-2型PPS/PTFE滤袋  运行时间2012年

  

Huaneng linyi power generation co., LTD., 2 * 140 mw FGD supporting engineering of bag-type dust collector AOBO - type 2 PPS/PTFE filter bag running time in 2012产品细节图AOBO-除尘滤袋

 孝义兴安化工有限公司热电厂  2*150MW机组袋式除尘配套工程 AOBO-2型PPS/PTFE滤袋  投运时间2012年、2014年 Xiaoyi sing-an chemical co., LTD. Supporting engineering of bag-type dust collector of 150 mw thermal power plant 2 * AOBO time - type 2 PPS/PTFE filter bag was put into operation in 2012, 2014
vsAOBO-除尘滤袋

兖矿集团国宏化工有限公司热电厂 3*50MW机组袋式除尘配套工程 

AOBO-2型PPS/PTFE滤袋   投运时间2014年

Yankuang group, the macro chemical co., LTD. Power plant 3 * 50 mw unit supporting engineering of bag-type dust collector

AOBO time - type 2 PPS/PTFE filter bag was put into operation in 2014

 

 

企业介绍

      截至目前公司共完成国家级科技创新项目四项（“863”、火炬计划、国家级新产品计划、创新基金），省级创新项目七项，市级技术创新项目十余项，已授权专利15项，其中发明专利4项。截止目前公司参与编制国家、行业和地方制标准六项，现在现行的山东省大气污染排放标注就是由我公司参与编制。标准的编制有力地提升了在行业制高点，有效地催生了市场，提升了产品的附加值。       公司现有生产和研发中心建筑面积达10万平方米，配备先进检测仪器设备30余台套。并与山东省科学院新材料研究所、东华大学和东北大学国家滤料检测中心建立了科技合作关系，成为合作单位硕士研究生工作站。公司技术中心2011年被山东省科技厅批建为“山东省袋式除尘工程技术研究中心”， 2012年被评为山东省企业技术中心。公司2013年被认定为省级高新技术企业。

      依靠科技进步公司产品质量不断提高、商业模式不断更新市场份额逐年递增，在垃圾焚烧、钢铁冶金、燃煤电厂等相关除尘领域不断拓展，服务范围涉及滤袋销售、设备制造、服务外包运营、BOT项目等多种合作渠道，并成功与华能电力、华电国际、中联水泥等大型企业合作。

So far the company has completed four state-level scientific and technological innovation projects (" 863 ", the torch plan, national new product plan, innovation fund), seven provincial innovation projects, more than 10 municipal technical innovation projects, 15 authorized patents, of which 4 invention patents. So far the company to participate in the preparation of national, industry and local standard six, now the current atmospheric pollution emissions is marked by our company in shandong province to participate in. Standard establishment vigorously promoted the commanding heights in the industry, has given rise to market effectively, improve the added value of products. Company's existing production and research and development center building area of 100000 square meters, equipped with advanced testing equipment more than 30 sets. And new materials research institute of shandong academy of sciences (liao, donghua university and the university of the northeast countries test center set up scientific and technological cooperation relationship, become partners graduate workstation. Company technology center in 2011 is shandong province department of group building for engineering technology research center of bag-type dust collector in shandong province ", was named in 2012 in shandong province enterprise technology center. The company in 2013 was identified as the provincial high-tech enterprises.

Rely on scientific and technological progress the company constantly improve the product quality and business model updating market share is increasing year by year, in waste incineration, steel, metallurgy, coal power plant dust areas related to continue to expand, services ranging from filter bag sales, equipment manufacturing, service outsourcing operations, BOT project, and other channels of cooperation, and success and huaneng power, huadian power international, China united cement and other large enterprises.

  企业证书