| 加工定制 : | 是 | 品牌 : | 锡华 |
| 型号 : | xh-20/25 | 类型 : | 螺杆式 |
| 螺杆形式 : | 单螺杆 | 主电动机功率 : | 5.5 |
| 螺杆直径 : | 40 | 螺杆长径比 : | 1:40 |
| 螺杆转速 : | 300 | 生产能力 : | 8 |
| 外形尺寸 : | 1550*500*1600 | 重量 : | 600 |
| 规格 : | 20 | 加热方式 : | 电加热 |
| 温度范围 : | 常温~300度 | 包装 : | 内泡棉 外木箱 |
XH-433双螺杆实验型造粒线
XH-433 Twin screw experimental granulation line
简介：本机适合工程塑胶、改性塑胶、废旧塑胶、色母粒的混炼加工实验。具有均质、塑化着色、填充改性等功能。
Introduction: This machine is suitable for mixing and processing experiments of engineering plastics, modified plastics, waste plastics and masterbatches. It has homogeneous, plastic coloring, filling modification functions.
工作原理：本机通过加热、混合，剪切、塑化、压实排气作用下，物料塑化成均匀的熔体，并在双螺杆的挤压下，通过机头挤出圆形的条状料，经冷却水槽水冷后或者风冷后，再经切粒机切粒，得到塑胶粒料。
Working principle: Under the action of heating, mixing, shearing, plasticizing and compacting the exhaust, the material is plastified into a uniform melt, and extruded under the twin-screw and extruded through the nose into round strips. The long strips after being cooled by water in the cooling water tank or after being air-cooled, then pelletized by a pelletizer to obtain plastic pellets.
型号 Model No. | XH-433-25 | XH-433-40 |
控制系统 Control system | PLC控制 PLC control | PLC控制 PLC control |
产量（kg) Capacity | 约1-10kg/h根据工艺配方 1-10kg/h(decide by formula ) | 约60/h根据工艺配方 60/h(decide by formula ) |
螺杆直径 Screw diameter | 21.7mm或指定 21.7mm or customized | 40mm或指定 40mm or customized |
长径比 L/D | 1：40 | 1：48 |
螺杆转速rpm Screw speed | 0-300 | 50-500 |
冷却装置 Cooling device | 风冷/水冷（可选配） Air/water cooling (optional) | 风冷/水冷（可选配） Air/water cooling (optional) |
风机 Fan | 1/4HP | 3HP |
切粒机(原有切粒装置) Cutting device | 切粒机Granulator | 切粒机Granulator |
电源 Power Supply | 3∮，AC380 | 3∮，AC380 |
生产车间实拍大图：
021-80107851